1. |
AIŠMAN David |
UWB in Pilsen, Pilsen, Czech Republic, EU |
Unconventional Heat and Thermo-Mechanical Treatment of Steel with High Content of Metastable Austenite Gained in Semi-Solid State |
Co-authors MAŠEK Bohuslav, JIRKOVÁ Hana |
2. |
ANDRŠOVÁ Zuzana |
Technical University of Liberec, Liberec, Czech Republic, EU |
The Potential of Isothermally Hardened Iron with Vermicular Graphite - POSTER |
Co-authors VOLESKÝ Lukáš |
3. |
BELAMRI CHerif |
University of Batna, BATNA, Algeria |
Influence of the Thermo-mechanical Treatments on the Relaxation Phenomena Observed on a single Crastal Alloy (Cu – At.11% Al) in Internal Friction at high Temperature - POSTER |
Co-authors BELHAS Saida, RIVIERE André |
4. |
BELHAS Saida |
University of Batna, Batna, Algeria |
Relaxation Effect Observed at Low Frequency in Al-Cu Alloy - POSTER |
Co-authors BELAMRI Chérif, BENYAHIA Nawel, RIVIERE André, GERLAND Michel |
5. |
BÍLEK David |
Technical University in Liberec, Liberec, Czech Republic, EU |
Integration of Ultrasound and Magnetic Methods of Non-destructive Structuroscopy for determination of mechanical properties of graphite cast irons - POSTER |
Co-authors SKRBEK Břetislav |
6. |
BOUTAREK Naïma |
USTHB, Algiers, Algeria |
Fractured Surface of an INCONEL 713 Superalloy Turbine Blade - POSTER |
Co-authors ACHEHEB Med Amine |
7. |
BOUTASSOUNA Djamal |
University of Laghouat, Laghouat, Algeria |
An Attempt for the Estimation of the Sulfur Segregation Energy for the Grain Boundary Segregation in Nickel - POSTER |
Co-authors LE GALL René, LEFKAIER Ibn Khaldoun |
8. |
CISKI Aleksander |
Institute of Precision Mechanics, Warsaw, Poland, EU |
Deep Cryogenic Treatment of High Speed Steel |
9. |
COJOCARU Radu |
National R & D ISIM, Timişoara, Romania, EU |
Possibilities of Monitoring the Friction Stir Welding Process by Real-Time Control of Energy Consumption |
10. |
ČAPEK Jaroslav |
ICT in Prague, Prague, Czech Republic, EU |
Influence of Short-Period Heat Treatment on Mechanical Properties of NiTi Wires |
Co-authors Kubásek Jiří |
11. |
DEWENTER Helge |
Benteler Tube Management GmbH, Paderborn, Germany, EU |
Effect of Rare Earth in Steel and Determination of Properties by Comparing Standard and New Methods |
Co-authors RICHTER Kai, SLOMSKI Nadine, ZYLLA Isabella-Maria, BALUN Jozef, DEPIERREUX Olivier, GROSSE-HEILMANN Niko, KRONHOLZ Christian |
12. |
DIEKMANN Uwe |
Metatech GmbH, Kamen, Germany, EU |
Calculation of Steel Data Using JMatPro - COMMERCIAL PRESENTATION |
13. |
DŽUGAN Jan |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
Material Properties Determination for Numerical Simulations of Large Deformations |
Co-authors KONOPÍK Pavel |
14. |
GREGER Miroslav |
VSB - Technical University, Ostrava, Czech Republic, EU |
Magnesium Alloys Die Forgings for Automotive Applications - POSTER |
Co-authors KANDER Ladislav |
15. |
GREGER Miroslav |
VSB - Technical University, Ostrava, Czech Republic, EU |
Equal Channel Angular Pressing 6082 Aluminum Alloy - POSTER |
Co-authors MAŠEK václav |
16. |
HÁJKOVÁ Pavlína |
CTU in Prague, Prague, Czech Republic, EU |
Effect of Deformation of Superheaters on Properties of New Creep Resistant Steel Type Super 304H - POSTER |
Co-authors JANOVEC Jiří, HORVÁTH Jakub, POLÁCHOVÁ Daniela |
17. |
HAUSEROVÁ Daniela |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
New Approach in Accelerated Carbide Spheroidisation of 100CrMnSi6-4 high-carbon chromium steel |
Co-authors DLOUHÝ Jaromír, NOVÝ Zbyšek, ZRNÍK Jozef |
18. |
HODEK Josef |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
Deform FEM Model of the Titanium Continuous Extrusion Process |
Co-authors ZEMKO Michal |
19. |
HORNÍK Jakub |
ICT in Prague, Prague, Czech Republic, EU |
Recrystallization Behaviour of Steels SA-508 and 3,5Ni-1,5Cr |
Co-authors ZUNA Petr, JANDOŠ František, ANISIMOV Evgeniy |
20. |
HOSSEINI Seyed Mohammad |
Imam Khomeini International University, Qazvin, Iran, Islamic Republic of |
Microstructural Evolution During Coiling Process in Thermomechanically- Processed Low-Silicon Multiphase TRIP-Assisted Steels - POSTER |
Co-authors ZAREI-HANZAKI Abbas, YUE Steve |
21. |
HOŠEK Václav |
Ecosond Ltd., Čerčany, Czech Republic, EU |
Pro-beam Technology - Heat Treatment of Metals |
22. |
HWANG Seung Joon |
Daejin University, Pocheon, Korea, Republic of |
Microstructure of Nanocrystalline Fe Dispersed with Al2O3 - POSTER |
23. |
JANDOVÁ Dagmar |
Research and Testing Institute Plzen, Pilsen, Czech Republic, EU |
Correlation of Microstructure Development of Cast CB2 Steel after Long-term Creep Tests with Electrochemical Characteristics |
Co-authors STREJCIUS Josef, KASL Josef |
24. |
JIRA Tomas |
Technical University in Liberec, Liberec, Czech Republic, EU |
The using of the Optical System Argus 4M in the Critical Area by the Body Work - POSTER |
Co-authors SOLFRONK Pavel, BELKOVA Monika |
25. |
JIRKOVÁ Hana |
UWB in Pilsen, Pilsen, Czech Republic, EU |
Influence of Chromium and Manganese on Mechanical Properties of Low Alloyed High Strength Steels with Retained Austenite Processed by Modern Methods of Thermomechanical Treatment |
Co-authors KLOKAN Martin, KUČEROVÁ Ludmila, MAŠEK Bohuslav |
26. |
KAASELITZ Ludwig |
Thermo Fisher Scientific, Vienna, Austria, EU |
XPS Profiling of Organic/Inorganic Multilayer Systems with a Combined Monoatomic and Gas Cluster Ion Source (MAGCIS) - COMMERCIAL PRESENTATION |
Co-authors MACK Paul, WHITE Richard G. & NUNNEY Tim |
27. |
KANDER Ladislav |
MATERIAL & METALLURGICAL RESEARCH,Ltd., Ostrava, Czech Republic, EU |
Effect of Severe Plastic Deformation on Structure and Properties of Austenitic AISI 316 Grade Steel - POSTER |
Co-authors GREGER Miroslav |
28. |
KANDER Ladislav |
MATERIAL & METALLURGICAL RESEARCH,Ltd., Ostrava, Czech Republic, EU |
Fatigue Properties of Steel used for Welded Rotors - POSTER |
29. |
KEJZLAR Pavel |
Technical University of Liberec, Liberec, Czech Republic, EU |
Structure and High-temperature Properties of Fe-Al-Zr Alloys - POSTER |
Co-authors KRATOCHVÍL Petr, VODIČKOVÁ Věra |
30. |
KHADIDJA Khenfer |
USTHB, Alger, Algeria |
Study of the Hard Facing Alloys. Hard Phases Obtained in Nickel Based Alloys. - POSTER |
Co-authors LEBAILI Soltan |
31. |
KŇAZOVICKÁ Lenka |
ICT in Prague, Praha, Czech Republic, EU |
A Paneuropean Projects for the Thermal Testing of the Materials - POSTER |
Co-authors STRNAD Radek |
32. |
KNOTEK Vítězslav |
ICT Prague, Prague, Czech Republic, EU |
Influence of Rare Earth and Transition Metals on Electrochemical Hydriding of Mg-based Alloys |
Co-authors VOJTĚCH Dalibor |
33. |
KONOPÍK Pavel |
COMTES FHT a.s, Dobrany, Czech Republic, EU |
Fracture Toughness Characterisation of the Martensitic Chromium Steel P91 |
34. |
KUBINA Tomáš |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
Preparation and Thermal Stability of Ultra Fine-grained Commercially Pure Titanium Wire |
Co-authors DUCHEK Michal, HODEK Josef, DLOUHÝ Jaromír, KÖVÉR Michal |
Collaboration: Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Paulínska 16, 917 24 Trnava, Slovak Republic |
35. |
KUČEROVÁ Ludmila |
UWB in Pilsen, Pilsen, Czech Republic, EU |
Improvement of Cold Formability of Spring Steel by Low-Temperature Thermo-Mechanical Processing |
Co-authors JIRKOVÁ Hana, ŠTÁDLER Ctibor, MAŠEK Bohuslav |
36. |
KURKA Petr |
Fraunhofer IWU, Chemnitz, Germany, EU |
Electromagnetic Forming and Joining of Tube and Sheet Metal - POSTER |
Co-authors NEUGEBAUER Reimund, PSYK Verena |
37. |
KVAČKAJ Tibor |
Technical University in Košice , Košice, Slovakia, EU |
Influence of Hot Processing Conditions on Properties of IF Steel - INVITED LECTURE |
Co-authors KRÁĽ Mirko, BACSÓ Július |
38. |
LABISZ Krzysztof |
Silesian University of Technology, Gliwice, Poland, EU |
Influence of HPDL Laser Alloying on Structure of Heat Treated Aluminium Alloys |
Co-authors TAŃSKI Tomasz |
39. |
LAHODA Jiří |
Charles University in Prague, Pilsen, Czech Republic, EU |
Mathematical Modelling of Ultra-Fine Grained Material as a Discrete-Time Chaotic System |
Co-authors ZEMKO Michal |
40. |
LANGMAJEROVÁ Danuše |
UWB in Pilsen, Plzeň, Czech Republic, EU |
Application of the Unconventional Thermomechanical Treatment on Low-Alloyed High-Strength Steel |
Co-authors JIRKOVÁ Hana, MIKMEKOVÁ Šárka, MAŠEK Bohuslav |
41. |
LESŇÁK Michal |
VSB - Technical University, Ostrava, Czech Republic, EU |
Magnetic Field Source with Halbach Permanent Magnets Configuration - POSTER |
Co-authors PIŠTORA Jaromír, ŽEŽULKA Václav, STRAKA Pavel, CIPRIAN Dalibor |
42. |
LEZHNEV Sergey |
Karaganda State Industrial University, Temirtau, Kazakhstan |
Development and Improvement of Technologies of Production of Metals and Alloys with Sub-Ultra-Fine-Grain Structure by Intensive Plastic Deformation |
Co-authors PANIN Evgeniy |
43. |
LUDVÍK Pavel |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
Vacuum Induction Furnace at COMTES FHT |
44. |
MANDZIEJ Stan |
Advanced Materials Analysis, Enschede, Netherlands, EU |
Manufacturing of Nano-Structured Alloys by MaxStrain Technique |
45. |
MAREŠOVÁ Martina |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
Youngs Modulus Determination for Spring Back Evaluation of Cold Formed Parts |
Co-authors DŽUGAN Jan, PROCHÁZKA Radek |
46. |
MARTINELLI Gianni |
Forging Technologies, Manno, Switzerland |
Close Die Forging - Is Success Dependings on Geography? - INVITED LECTURE |
47. |
MATOCHA Karel |
MATERIAL AND METALURGICAL RESEARCH Ltd., Ostrava, Czech Republic, EU |
Determination of Critical Temperature of Brittleness t(k0) by Small Punch Tests |
Co-authors FILIP Miroslav, STEJSKALOVÁ Šárka |
48. |
MĚŠTÁNEK Petr |
Škoda power, Plzen, Czech Republic, EU |
Fatigue properties of the Titanium Alloy |
49. |
MICHALCOVÁ Alena |
ICT in Prague, Prague, Czech Republic, EU |
Recycling of Aluminium Alloys Waste into Nanocrystalline Thermally Stable Alloy |
Co-authors VOJTĚCH Dalibor, NOVÁK Pavel, VODĚROVÁ Milena, ŠVEC Peter |
50. |
MIŠTEROVÁ Hedvika |
UWB in Pilsen, Plzeň, Czech Republic, EU |
The Potential of Steels with High Content of Vanadium and Chromium Produced by Powder Metallurgy for Processing by the Mini-thixoforming |
Co-authors JIRKOVÁ Hana, AIŠMAN David, MAŠEK Bohuslav |
51. |
MOTYČKA Petr |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
Evaluation Methods of Dilatometer Curves of Phase Transformations |
Co-authors KÖVÉR Michal |
Collaboration: Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Paulínska 16, 917 24 Trnava, Slovak Republic |
52. |
NOVÁK Pavel |
ICT in Prague, Prague, Czech Republic, EU |
Development of Surface Treatment for Thermally and Mechanically Loaded Parts of Combustion Engines |
Co-authors VYSTRČIL Jiří, CHOCHOLATÝ Ondřej, MICHALCOVÁ Alena, VOJTĚCH Dalibor |
53. |
NOVÝ Zbyšek |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
West-Bohemian Centre of Materials and Metallurgy - COMMERCIAL PRESENTATION |
54. |
OČENÁŠEK Vladivoj |
SVÚM a.s., Praha, Czech Republic, EU |
Fatigue Properties of Hand Forgings from 7175 Aluminium Alloy - POSTER |
55. |
OGAWA Kazuhiro |
Tohoku University, Sendai, Japan |
Effects of Ce Additions to Bond Coat Material on Interfacial Strength of Thermal Barrier Coatings - INVITED LECTURE |
Co-authors KANZAKI Shinji |
56. |
OCHODEK Vladislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
Evolution of Residual Stresses in the Steel Strip during DRECE Technology |
Co-authors RUSZ Stanislav |
57. |
OLSZAR Miroslav |
Třinecké železárny, a.s., Třinec, Czech Republic, EU |
Classification and Standardization of the Structure and Grain Size of Bulk Metal Materials |
Co-authors OLSZAR Martin, CHWISTEK Gustav |
58. |
PARVIN Nader |
Amirkabir University of Technology (Tehran Polytechnic) , Tehran, Iran, Islamic Republic of |
Fractography of Steam Treated Sintered Steel Compacts - POSTER |
Co-authors HASHEMI Zahra, PEIGHAMBARZADEH Seyyed Mohammad Hossein, NAEIMI Mohammad |
59. |
PARVIN Nader |
Amirkabir University of Technology, Tehran, Iran, Islamic Republic of |
Investigating the Effect of Type and Thickness of the Oxide Layer Produced by Steam Treatment on Wear Behavior of Sintered Steel Compacts - POSTER |
Co-authors HASHEMI Zahra, PEIGHAMBARZADEH Seyyed Mohammad Hossein, NAEIMI Mohammad |
60. |
PETROVÁ Jana |
ICT in Prague, Praha, Czech Republic, EU |
System for Image Analysis of Nanostructured Alloys - POSTER |
Co-authors MORAVEC Hynek, MUDROVÁ Martina, JOSKA Luděk |
61. |
PFAFF Holger |
Agilent Technologies, Frankfurt, Germany, EU |
Beyond the Limits – Alternative Testing Concepts in Nano Mechanics |
Co-authors HAY Jennifer |
62. |
PINDOR Jaroslav |
MATERIAL & METALLURGICAL RESEARCH,Ltd., Ostrava, Czech Republic, EU |
First Results in Solving the Project Called the Regional Materials Science and Technology Centre in the Company of MATERIÁLOVÝ A METALURGICKÝ VÝZKUM s.r.o. - COMMERCIAL PRESENTATION |
63. |
PODANÝ Pavel |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
Heat Treatment of Reactor Vessel Steel AISI 321 |
Co-authors MARTÍNEK Petr, NACHÁZEL Jan, BALCAR Martin |
64. |
PODJUKLOVÁ Jitka |
VSB - Technical University, Ostrava, Czech Republic, EU |
Effect of Size Clay Particles on Functional Properties of Vitreous Enamel Coats |
Co-authors HRABOVSKÁ Kamila, LANÍK Tomáš, ŠRUBAŘ Petr, SUCHÁNKOVÁ Kateřina, KOPAŇÁKOVÁ Sylvie |
65. |
POLÁCHOVÁ Daniela |
UJP PRAHA a.s., Praha, Czech Republic, EU |
Comparison of Mechanical Properties of P91 Steel Depending on Temperature and Annealing Time of Degradation |
Co-authors SVOBODOVÁ Marie, HÁJKOVÁ Pavlína, UZEL Josef |
66. |
POLÁKOVÁ Ivana |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
FEM Simulation of Strips Cold Rolling in Deform 3D |
Co-authors ZEMKO Michal |
67. |
POLYAKOVA Veronika |
Ufa State Aviation Technical University, Ufa, Russian Federation |
Study of Ultrafine Grained TI-6AL-4V Linear Friction Welds |
Co-authors YAKUSHINA Evgeniya, SEMENOVA Irina, ROSOCHOWSKI Andrzej, GABITOVA Svetlana |
68. |
PRANTL Antonín |
ŠKODA-JS a.s., Plzeň, Czech Republic, EU |
Identification of Ductile Damage Parameters - Experimental Part |
Co-authors DŽUGAN Jan, KONOPÍK Pavel |
69. |
PUCHNIN Maxim |
CTU in Prague, Prague, Czech Republic, EU |
The Method of Accounting of Elastic Deformation Occur during the Automated Ball IndentationTest |
Co-authors ANISIMOV Evgeniy |
70. |
RAPOUCH Jiří |
ICT Prague, Prague, Czech Republic, EU |
Influence of Tungsten and Carbon Addition on Electrochemical Behaviour of 9 % Cr Creep-resistant Steel |
Co-authors BYSTRIANSKÝ Jaroslav |
71. |
RUSZ Stanislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
The Influence of the SPD Process on Deformation Behavior and Mechanical Properties of the Obtained Al Alloys |
Co-authors CIZEK, L., TYLSAR, S., SALAJKA, M., KEDROŇ, J., MALANIK, K. , DONIC, T., HADASIK, E., KLOS, M. |
72. |
SHERSTNEVA Marina |
National University of Science, Moscow, Russian Federation |
Model of Decision-Making on the Basis of Expectations of Shareholders and Portfolio investors - POSTER |
Co-authors KOSTYHIN Yury |
73. |
SHINDE Subodh |
ArcelorMittal, Ostrava Kunčice, Czech Republic, EU |
Recent Developments in the Use of Quenched and Self-Tempered Hot Rolled H-Beams |
Co-authors MAY Marc |
74. |
SCHINDLER Ivo |
VSB - Technical University, Ostrava, Czech Republic, EU |
Optimization of the Rolling Speed at Hot Forming of Iron Aluminide of the Type Fe-40at.%Al - INVITED LECTURE |
Co-authors ŠUMŠAL Václav, FABÍK Richard |
75. |
SÍS Jiří |
SVÚM a.s., Praha, Czech Republic, EU |
Different Diffusion Behavior of Alloy Elements as a Consequence of Mistaken Material and Usual Heat Treatment |
Co-authors MIKULOVÁ Dagmar |
76. |
SKOTNICOVÁ Kateřina |
VSB - Technical University, Ostrava, Czech Republic, EU |
Preparation of Magnets Nd-Fe-B in using TbH2 and Study of their Structure and Magnetic Properties |
Co-authors KOLCHUGINA Natalia B., LUKIN Aleksandr A., KURSA, Miroslav |
77. |
STRÁSKÝ Josef |
Charles University in Prague, Prague, Czech Republic, EU |
Investigation of Mechanical Properties and Bicompatiblity in Vitro of Ti-Nb-Ta-Zr Alloy with Small Fe and Si Additions |
Co-authors HARCUBA Petr, KOPOVÁ Ivana, BAČÁKOVÁ Lucie, JANEČEK Miloš |
78. |
ŠEVČÍK Pavel |
BAS Rudice spol. s r.o., Blansko, Czech Republic, EU |
New Trends in Elemental Analysis - COMMERCIAL PRESENTATION |
79. |
ŠIMEČEK Jiří |
UWB in Pilsen, Pilsen, Czech Republic, EU |
Influence of Surface State Involved by Different Machining Technologies on Fatigue Properties of Steel X210Cr12 |
Co-authors KŘÍŽ Antonín |
80. |
ŠOHAJ Pavel |
Brno University of Technology, Brno, Czech Republic, EU |
Equilibrium Calculation of Creep-Resistant Steels - POSTER |
Co-authors FORET Rudolf |
81. |
TAŃSKI Tomasz |
Silesian University of Technology, Gliwice, Poland, EU |
Surface Treatment Influence on Properties of the Heat Treated Light Cast Alloys |
82. |
UMEDA Takateru |
Sahaviriya Steel Industries, Bangkok, Thailand |
Cracking Behavior during Solidification of Steel and Aluminum Alloy - INVITED LECTURE |
83. |
WEISS Zdeněk |
LECO Instrumente Plzen Ltd., , Czech Republic, EU |
Examples of Analyses Performed by Glow Discharge Spectroscopy (GDS) and LECO Combustion Analyzers |
84. |
WILDE Gerhard |
University of Muenster, Muenster, Germany, EU |
Towards Multifunctional Bulk Nanostructures: Grain Boundary Structure and Grain Boundary Diffusivity of Severely Strained Alloys - INVITED LECTURE |
85. |
ŻABA Krzysztof |
AGH University of Science of Technology, Kraków, Poland, EU |
Deformability of Strips of Nickel Superalloys Intended for Shell Elements of Aircrafts |
Co-authors Maciej NOWOSIELSKI, Michal KWIATKOWSKI, Marcin HOJNY |
86. |
ŻABA Krzysztof |
AGH University of Science of Technology, Kraków, Poland, EU |
Influence of Lubricants on the Wear Resistance of Aluminized Steel Strip |
Co-authors NOWOSIELSKI Maciej, MADEJ Marcin, Kita Pawel |
87. |
ZIMOVČÁK Peter |
U. S. Steel Kosice Ltd., Košice, Slovakia, EU |
Design of Dual Phase Steels with 450 - 600 MPa Strength - POSTER |
Co-authors JUHAR Ľuboš, KUČERA Ivor, GRABAN Juraj |
88. |
ZRNÍK Jozef |
COMTES FHT Inc. , Dobřany, Czech Republic, EU |
Prior Microstructure Modification and Synergic Effect of Deformation in TRIP Steel - INVITED LECTURE |
Co-authors MURÁNSKY Ondrej, ŠITTNER Petr |